The sizes of band saw machine HCBM -1000: thickness - 2 mm, width - 60 mm, length - 5000 mm.

The most admissible sizes of the wood for slit cutting on the HCBM -1000: diameter - 1000 mm , length - 4 m.

Steam kiln

Slicing machines of the horizontal type - CAPITAL ST- 400

As the drive of cutting device is used the gyratory mechanism. The work of slicing machines has the following characteristics:

maximum height of workpiece - 1200 mm;

maximum width of the block pieces - 1200 mm;

the maximum length of the block pieces - 3300 - 4000 mm;

thickness of the veneer - 0.4 ... 1.0 mm;

the number of double stroke of the support - 10-19 strokes per minute.

It’s determined the following order of the work on the slicing machines: giving steamed wainscot, or squares on the desktop machine , fastening of the workpieces, machine control, slicing and taking down  the veneer in the packs, placing the veneer packs to the drying chamber, turning the workpieces, reattaching them on the desktop machine, slicing, removing board core, waste removal, replacement, installation and stropping of the blade and setting the machine on the following slicing.

Drying chamber MOCAMA, models 2800 and 4000 and BABCOCK – BSH

These drying chambers are the units of continuously working with the forced air circulation, the veneer moves along the dryer from one end to other end with the help of net and as a result is drying. The width working area of the dryer - 2800 mm, 4000 mm, number of sections - 6, 8. The agent of the dryer is heated air with a temperature of 140 ... 160 ° C. The air is heated by the finned heaters with giving thermal oil with high temperature. The circulation of heated air in the chamber is provided with ventilators.

Drying chamber BABCOCK - BSH has the smoothing effect that increases the quality of veneer.